#102MM: M20J/R 1/4" Thick Factory OEM Windshield Mod Primarily For Pre-201 Type Mooneys

(See Mod #106MMA For Info & Pricing For Our Thicker W/Shield Mods For M20J & ON M20's)

Original Stock One Piece Windshield
Note: The original pre-201 w/shields came in two piece w/a center post and one piece as shown. (The older one piece shown is actually not preferred as it is noiser.)		 New 1/4" 201/252 Windshield During Installation
Note: Our factory style mod includes All OEM NEW "cowl deck assy. and new side post skins and doublers etc.		 Completed 1/4" or 3/8" 201/252 Windshield Mod
Note: No more leaky panels and instrument access is actually improved via removable glare shield.

The Single Most Dramatic Visual Mod We Have For Older Pre-201 Mooneys

This OEM MOD IS NOT TO BE CONFUSED with any similar appearing but cheaper non-factory ADD-ON Type mod. This OEM mod uses an extensive list of genuine Mooney Factory Parts such as: new cowl deck assembly, the important structural retainer/doublers used on all OEM Mooneys, all new side post skins, and the vital factory molded aluminum retainer bow assy. Also included is a modification to your existing glare shield, and the use of the more appealing flush rivets for exterior construction.

Remember, our installation DUPLICATES THE FACTORY (OEM) INSTALLATION EXACTLY including anchoring the skin (in the w/s area) to the 4130 fuselage structural steel bow. Specifically, this mod uses the much needed (and we think mandatory) "factory 201 Cowl Deck Assembly" (see photo insert) which eliminates those leaky inspection panels while increasing instrument panel accessibility through a easily removable interior glare shield.

Note: We feel the Cowl Deck assembly is virtually a structural and practical necessity in doing this mod while being largely responsible however, for the cost differential between this mod and others which do not use this vital structural component. We urge you to investigate prior to making your decision when considering up-grading your pre-201 Mooney.

During Windshield Mod

Owners report this mod is dramatic in both appeal and effect in the real world of Mooney ownership. It is perhaps the most effective all all mods as it:

1) Makes the cabin significantly quieter

2) Allows the cabin to appear larger and actually increases cabin area

3) Increases visibility

4) Makes the entire aircraft appear modern and up to date, inside and out.

5) Eliminates those leaky inspection panels

6) Provides for better instrument panel access (via the removable glare shield There is no doubt, this mod actually changes the entire appearance and ambiance of the whole aircraft!

Don't accept a cheaper look-alike!

Get the OEM stronger, well-engineered & complete Mooney Factory Installation by US!!!

Unsure about the differences? Ask Mooney for details!

Quality OEM Mods Aren't An Expense, They Are An Investment

You may also note, like the vast majority of our OEM Factory Style Mods, this mod is listed in The AIRCRAFT BLUEBOOK PRICE DIGEST as adding significantly to re$ale value.

Note: We also offer a 3/8" thick windshield and a removable Velcro glare shield as options both in this Mod and for installation in any M20 (Including newer M20's which already have this style windshield installed). Thicker windshields in newer M20's are (naturally) substantially less expensive.

#102MM: 201/252 1/4" Thick FACTORY OEM WINDSHIELD MOD:
Using OEM Factory Cowl Deck, Retainers, and Doublers etc. And Incls. Tinted 1/4" Glass.		 $6,895.00
May be installed w/out Retainers and Doublers for approx.
Call for specific details.		 $6,495.00
We also offer a 3/8" thick W/S
as an option, Installed		 $7,595.00

Back   Next